Synthetic oil is a lubricant made up of artificially made chemical compounds; these compounds are made by breaking down and then rebuilding petroleum molecules.
High-speed Helical Gear Cooling and Lubrication
Helical gears are used to reduce the speed of centrifugal compressors and turbines to match nominal motor and generator speeds. Proper lubrication and cooling are critical to the successful operation of these gears. When gears mesh, the tooth surfaces roll and slide against each other.
A Guide to Oil Sampling Hardware
Using the right oil sampling hardware helps ensure you’re getting an accurate sample every time.
Why You Need Good Maintenance Procedures
There are several consistencies in the types of people who go into industrial maintenance. They tend to be type “A” personalities — confident, somewhat cocky and a little rebellious. Their value is in the knowledge and ability they bring with them, and they don’t see this as something that can easily be replaced. They are independent and take a lot of pride in their knack for getting the job done. This helps to explain some of their resistance to maintenance procedures.
Value Stream Mapping: A Complete Guide
Value Stream Mapping is used to analyze the current state and design a future state for the process that takes a product from start to finish with as little waste as possible.
